The Clean Burn Model CTB-200 waste oil boiler has an input rating of 200,000 BTU/hr and outputs 148,400 BTU/hr. The CTB-200 is UL listed for use in central heating systems.
With CTB-200, you spend 30 minutes cleaning every 750 hours of operation. It is uniquely designed for installation flexibility. Engineered for use as a single boiler unit, or it can be used in combination with any Clean Burn boiler to create a system perfectly sized for any facility.
|BTU/hour input:||200,000 / 58.6 kW|
|BTU/hour output:||148,500 / 43.5 kW|
|Fuels||Used oils: Crankcase,ATF, hydraulic
Fuel oils: #2, #4, and #5 fuel oil
|Heating Surface||39 sq. ft. / 3.6 sqM|
|Design water flow per coil||15 gpm / 57 lpm|
|Cabinet dimensions||40″ L x 29″ W x 29.5″ H
101cm x 74cm x 75cm
|59″ L x 33.25″ W x 37″ H
150cm x 84cm x 94cm
|Approx. Weight||677 lbs. / 304.7 kg|
|Electrical Requirements||115 VAC 60 Hz single phase*
*230V/ 50Hz units also available
|Maximum oil consumption||1.4 GPH / 5.3 lph|
|Stack size||8″ / 20cm|
|Air compressor required||2.0 CFM @ 25 PSI
3.4 m3/h @ 1.7 bar
|Recommended clean-out||750 hours|
*Values indicated above are nominal. Actual values will vary depending on fuel and installation.